Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

! WARNING ! (minus)

Please do NOT reset factory your gateway by keep pushing the reset button ! (or you will lose the µWiotys firmware)

Before push the button, contact your saler to know the process!

Gateway and accessories

First, install the gateway with proper accessories and connect it to your local network.

image-20240328-100507.png

You should be able to ping the gateway default IP address at 192.168.1.100.

 How to connect your PC directly to the gateway with IP fix on Windows 10

  1. Open Control Panel.

  2. Click on Network and Internet.

  3. Click on Network and Share Center.

  4. Click the Change adapter settings from the left navigation pane.

  5. Right-click the network adapter and select the Properties option.

    image-20250113-134551.png

  6. Double click on the Internet Protocol Version 4 (TCP/IPv4) option.

  7. Select the Use this following IP address option.

    image-20250113-134658.png

  8. In the IP address field specify an address for the device. For example, 192.168.1.111.

  9. In the Subnet mask field specify the subnet address for the network. For example, 255.255.255.0.

  10. Click the OK button.

If this is not possible, please make sure that the necessary ports are open listed in Description.

image-20240306-083856.png

The Web interface is used for

  • Network configuration or remote support

  • LoRaWAN Uplink logs and Downlink management

As soon as you logged in, you will be on the dashboard page that shows you the status of your gateway.

  • No labels