| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Please be patient with those steps, start up the gateway and actions with FTP can take a long time |
...
| Note |
|---|
Warning the response time of µWiotys' FTP can be a little bit long, especially on fixed IP. Don’t forget to refresh in order to see your current files |
Contact your seller for user/password
End device configuration
LoRaWAN device provisioning on µWiotys can be done by FTP transfer.
First, create the configuration file with proper parameters and format then connect to µWiotys with FTP and copy the configuration file into the proper directory.
...
Copy the devices configuration file into the directory: /uwiotys/update_config/
Create an empty file named "reboot" in directory "/update/". You can reboot with this method or with the reboot web interface button
| Note |
|---|
An electric reboot can corrupt the update process ! |
| Info |
|---|
Few milliseconds after, a "reboot_processed_ok" file will be created. You can log out of your GW and move on to the next step. |
After few minutes
If the update failed, you will find information into the file: devices_updates_$DATE_ERROR.log
If the update success, the file the devices configuration file is deleted and you will find the file: devices_updates_$DATE_SUCCESS.log
The devices current configuration of µWiotys is available in the directory: /uwiotys/current_config/
...
"No license found, µWiotys will not start. Please configure a valid license for your µWiotys gateway XXXXXXXX"when NO license is present."The license is VALID. µWiotys will start."when the product HAS a license.
How to know the license's type and state
...
| Code Block | ||
|---|---|---|
| ||
License allow user to activate the following output:
Modbus output: true/false
Csv output: true/false
Http output: true/false
Mqtt output: true/false
Bacnet output: true/false |
Software Update
...