Quick Start

Owned by Bao
Last updated: yesterday at 12:39 pm
2 min read

! WARNING !

Please do NOT reset factory your gateway by keep pushing the reset button ! (or you will lose the µWiotys firmware)

Before push the button, contact your saler to know the process!

Gateway installation and accessories

First, install the gateway with proper accessories and connect it to your local network.

image-20240328-100507.png
µWiotys gateways and accessories

You should be able to ping the default IP address of µWiotys at 192.168.1.100 (or DHCP IP if requested)

  1. Open Control Panel.

  2. Click on Network and Internet.

  3. Click on Network and Share Center.

  4. Click the Change adapter settings from the left navigation pane.

  5. Right-click the network adapter and select the Properties option.

    image-20250113-134551.png

  6. Double click on the Internet Protocol Version 4 (TCP/IPv4) option.

  7. Select the Use this following IP address option.

  8. In the IP address field specify an address for the device. For example, 192.168.1.111.

  9. In the Subnet mask field specify the subnet address for the network. For example, 255.255.255.0.

  10. Click the OK button.

If this is not possible, please make sure that the necessary ports are open listed in Description.

The Web interface is used for

  • Network configuration or remote support

  • LoRaWAN Uplink logs and Downlink management

First step - µWiotys Login