...
...
...
...
...
...
...
...
| minLevel | 1 |
|---|---|
| maxLevel | 6 |
| outline | false |
| style | default |
| type | list |
| printable | false |
...
| Info |
|---|
We recommend using FileZilla to configure the device! |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
! WARNING ! Please do NOT reset factory your gateway Before push the button, contact your saler to know the process |
Configuration
You can configure µWiotys from a computer within your local network.
| Info |
|---|
Wi6labs provide an Online support interface to facilitate the devices configuration on the gateway but µWiotys does not require internet connection. |
...
Configuration interfaces
Two interfaces are available to customize µWiotys.
FTP interface for:
Management of the device fleet
Configuration of outputs
Web Interface for:
Network configuration
LoRa Downlink management
Connect your gateway
First, install the gateway with proper accessories and connect it to your local network.
...
You should be able to ping the gateway (default address is192.168.1.100).
If this is not possible, please make sure that the necessary ports are open. (Those are listed in Description)
Panel
| panelIconId | atlassian-minus |
|---|---|
| panelIcon | :minus: |
| panelIconText | :minus: |
| bgColor | #FFEBE6 |
! WARNING ! 
...
The Web interface is used for
Network configuration or remote support
LoRaWAN Uplink logs and Downlink management
Configure your devices
Next, you need to create the configuration file (named devices_update.json) that contains necessary informations : Reference, DevEUI, AppKey, Modbus Slave address,...
You can check out our Online support interface https://app.uwiotys.com/index.php/device/list to help you create your configuration file
or FTP configuration for expert details.
Once your configuration is ready make sure to rename it devices_update.json.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
FOR BACNET For BACnet : In the “Modbus address” you can choose any number for BACnet ID but it has to follow each other (if you want to start with 13 through 20, you have to set 13,14,15,16…2015…20) in 3.4.0 (Corrected from 3.4.5) |
...
Push device configuration with FileZilla
It is now time to connect to your gateway using a FTP client (like, for instance, FileZilla)
...
After that, you need to reboot to process the device update.
See FTP configuration for more details.
| Note |
|---|
Warning The LoRa LoRaWAN device should only be started after the configuration is successfully done. |
Read sensors data (Modbus/BACnet)
Finally, you can see your device's data based on the µWiotys output protocol.