| Info |
|---|
In this example, we use We recommend using FileZilla to configure the device.! |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
! WARNING ! Please do NOT reset factory your gateway Before push the button, contact your saler to know the process |
Configuration
You can configure µWiotys from a computer within your local network.
...
First, install the gateway with proper accessories and connect it to your local network.
...
You should be able to ping the gateway (default address is192.168.1.100).
If this is not possible, please make sure that the necessary ports are open. (Those are listed in Description)
Panel
| panelIconId | atlassian-minus |
|---|---|
| panelIcon | :minus: |
| panelIconText | :minus: |
| bgColor | #FFEBE6 |
! WARNING ! 
Please do NOT reset factory your gateway by keep pushing the reset button or the reset factory option from the web interface ! (or you will lose the µWiotys firmware)
...
The Web interface is used for
Network configuration or remote support
LoRaWAN Uplink logs and Downlink management
Configure your devices
Next, you need to create the configuration file (named devices_update.json) that contains necessary informations : Reference, DevEUI, AppKey, Modbus Slave address,...
You can check out our https://app.uwiotys.com/index.php/device/list to help you create your configuration file
or FTP configuration for expert details.
Once your configuration is ready make sure to rename it devices_update.json.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
For BACnet : In the “Modbus address” you can choose any number for BACnet ID but it has to follow each other (if you want to start with 13 through 20, you have to set 13,14,15…20) in 3.4.0 (Corrected from 3.4.5) |
...