Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

µWiotys is plug and play and compatible with BMS on the market. It supports many LoRaWAN devices.

...

  1. Select LoRa LoRaWAN devices from the list compatible with µWiotys

  2. Configure your LoRa LoRaWAN Device in µWiotys gateway

  3. The LoRa LoRaWAN payload are decoded and made available in Modbus registers and/or HTTP/MQTT output and CSV files available locally.

Main Feature

  • Up to 200 LoRa LoRaWAN devices connected

  • Data decoding available for a catalogue of devicedevices

  • Indoor and outdoor gateways available

  • Each LoRa device is managed as a individual modbus slavein an individual Modbus address on the Gateway

Radio Coverage

The radio coverage of the gateway can vary from a few hundred meters to more than 15 km. Several factors should be considered :

  • The location of your devices : outdoor, indoor, deep indoor. Always position your device at least 20 cm away from possible interference like solid walls, metal structures,…

  • The location of the gateway: always select highest ground and position antenna away from possible interference like walls, metal structures,…

  • The type of gateway and accessories:

    • Indoor gateway Kerlink iFemtocell iFemtoCell and iFemtoCell-Evolution can cover a building using indoor and outdoor devices.

    • Outdoor gateway Kerlink iStation can cover several buildings using indoor, outdoor and deep indoor devices.

    • An external antenna can also be added to iStation in order to extend coverage.

Wi6labs offers radio coverage studies (Radio-Mapping) and installation services for gateways. Please contact support for more details.

Configuration

You can configure µWiotys from a computer within your local network.

Wi6labs provide an Online support interface to help with facilitate your gateway configuration but µWiotys does not require internet connection.

...