| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Copy the devices configuration file into the directory: /uwiotys/update_config/
Create an empty file named "reboot" in directory "/update/". You can reboot with this or with the button web’s interface.
| Note |
|---|
An electric reboot can corrupt the update process |
After few minutes
If the update failed, you will find information into the file: devices_updates_$DATE_ERROR.log
If the update success, the file the devices configuration file is deleted and you will find the file: devices_updates_$DATE_SUCCESS.log
The devices current configuration of µWiotys is available in the directory: /uwiotys/current_config/
...
Upload configuration
Upload the license
To give or update a license, the license's file has to be put in the following folder using FTP : /uwiotys/update_config/
After that step, a reboot is needed to take this license into account. You can reboot by two ways:
With ftp :
Create a file named "reboot" in directory "/update/".
A file XXXXXXXX_reboot_processed_yy is created once command processed.
Command reboot is processed if XXXXXXXX_reboot_processed_yy does not exist and each time the command file is edited.
With Kerlink gateway button:
iFemToCell: Press the reset button located on the side of the gateway.
iStation: Press once (and only once) the On/Off button.
See How to know if the product has a license to know if the license is correctly added.Same process than before, see Upload config and replace with the license_XXXXXXXX.json
How to know if the product has a license
...