| Table of Contents | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
In this example, we use FileZilla to configure the device and Modbus doctor to read modbus data from µWiotys
...
Connect your gateway
First, install your gateway with proper accessories according to your model and connect it to your local network.
You should be able to ping the gateway (default address is 192.168.1.100). If this is not possible, please make sure that the necessary ports are open. (Thoses Those are listed in Description)
...
...
Configure your devices
First, you need to create the configuration file (named devices_update.json) that contain necessary informations : Reference, DevEUI, AppKey, Modbus Slave address,...
...
Once your configuration is ready make sure to rename it devices_update.json.
...
...
Push device configuration with FileZilla 3.51.0
It is now time to connect to your gateway using a FTP client (like, for instance, FileZilla)
...
Warning The Lora device should only be started after the configuration is succesfully done. µWiotys configuration must be valid before the device does a Join Request.
...
Read with Modbus Doctor 2.7
Configuration
TCP/IP IP adress is µWiotys IP adress Numport : 502 Timeout : 1000
...